Mini Xtreme Mix Air Caps – Air Assisted Airless Spray Gun Tip

Description

Sagola Mini Xtreme MIX AAA Spray Tips

Sagola Mini Xtreme MIX AAA spray tips are designed for air-assisted airless spraying where clean atomization, controlled fan patterns, and consistent coating transfer are important. These replacement MIX aircap tips help painters match the right nozzle size and spray angle to the coating, part size, and finish requirements.

Available in a range of sizes from fine-finish tips to larger high-build options, these Sagola AAA spray tips can be used for finishes, lacquers, enamels, mold release, urethanes, acrylics, fillers, primers, anticorrosive primers, and other higher-viscosity coatings.

Why Use Sagola Mini Xtreme MIX Spray Tips?

The correct spray tip helps improve coverage, reduce rework, and keep the spray pattern more predictable. Smaller nozzle sizes are ideal for thinner coatings, detail work, and fine finishes, while larger nozzle sizes help move heavier materials and build film thickness faster.

• Clean atomization: Designed for smooth, controlled spray performance with compatible AAA systems.
• Multiple fan options: Choose narrower or wider spray angles depending on part size and overlap technique.
• Fast tip selection: Tip codes such as 09/40, 15/80, and 21/80 make it easier to compare orifice size and fan width.
• Application flexibility: Suitable for fine finishes, primers, fillers, and higher-viscosity coatings.

How to Choose the Right AAA Spray Tip

Start by matching the nozzle size to your coating. Thinner coatings typically use a smaller orifice for better control, while thicker coatings usually require a larger orifice for proper flow. Next, choose the fan angle based on the size of the part and the amount of coverage needed.

• Fine finishes: Use smaller tips for better control and reduced material output.
• General coating work: Mid-size tips are commonly used for lacquers, enamels, urethanes, acrylics, fillers, and primers.
• High-viscosity products: Larger tips are better suited for heavy primers, anticorrosive coatings, and faster film build.

Fan width and product output can vary depending on fluid pressure, coating viscosity, hose setup, filter condition, and operator technique. Always confirm the correct tip size for your coating system before spraying.

For best results, use original Sagola replacement parts and compatible AAA tip filters to help maintain spray consistency, reduce clogging, and protect your equipment.